Shared projects

ESP32DevBoard.v02b

4 layer board of 0.71 x 1.31 inches (18.0 x 33.2 mm).
Shared on February 19th, 2018 01:48

ESP32 development board for ESP32.D2WD module.


ESP32DevBoard.v02b

4 layer board of 0.71 x 1.31 inches (18.0 x 33.2 mm).
Shared on February 19th, 2018 01:48

ESP32 development board for ESP32.D2WD module.



ESP32.D2WD.module.v01a

4 layer board of 0.50 x 0.63 inches (12.7 x 16.0 mm).
Shared on February 18th, 2018 23:13

Added chip antenna.


ESP32.D2WD.module.v01a

4 layer board of 0.50 x 0.63 inches (12.7 x 16.0 mm).
Shared on February 18th, 2018 23:13

Added chip antenna.



ESP32.D2WD.module.v01

4 layer board of 0.50 x 0.63 inches (12.7 x 16.0 mm).
Shared on February 18th, 2018 02:40

Small module (12.7 x 12.7 mm plus 3.3 x 12.7 mm for simple monopole antenna) for Espressif’s ESP32 D2WD with 2 MByte embedded SPI NOR flash. Exposes 24 GPIOs to the user as back pads for surface mounting onto acceptor board.


ESP32.D2WD.module.v01

4 layer board of 0.50 x 0.63 inches (12.7 x 16.0 mm).
Shared on February 18th, 2018 02:40

Small module (12.7 x 12.7 mm plus 3.3 x 12.7 mm for simple monopole antenna) for Espressif’s ESP32 D2WD with 2 MByte embedded SPI NOR flash. Exposes 24 GPIOs to the user as back pads for surface mounting onto acceptor board.



ESP32DevBoard.v02a

4 layer board of 0.71 x 1.41 inches (18.0 x 35.7 mm).
Shared on February 17th, 2018 03:22

Added missing VUSB on STBC08 battery charger, corrected swapped RX/TX lines at the ESP32.


ESP32DevBoard.v02a

4 layer board of 0.71 x 1.41 inches (18.0 x 35.7 mm).
Shared on February 17th, 2018 03:22

Added missing VUSB on STBC08 battery charger, corrected swapped RX/TX lines at the ESP32.



Sentinel.v02b

4 layer board of 1.14 x 1.14 inches (29.0 x 29.0 mm).
Shared on February 13th, 2018 01:09

Added additional analog pin and power port on board edges, swapped GPIO connections, moved indicator led.


Sentinel.v02b

4 layer board of 1.14 x 1.14 inches (29.0 x 29.0 mm).
Shared on February 13th, 2018 01:09

Added additional analog pin and power port on board edges, swapped GPIO connections, moved indicator led.