Shared Projects by PeskyProducts

Shared Projects by PeskyProducts

ST1PS03A.v02a

Top
Bottom

2 layer board of 1.60 x 0.61 inches (40.6 x 15.4 mm)
Uploaded: January 14th 2022
Shared: January 14th 2022
Total Price: $4.80

Fixed PG indicator (active HIGH) and filtered USB inputs.

Fixed PG indicator (active HIGH) and filtered USB inputs.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ICM42688_MMC5983_LPS22HB.v01

Top
Bottom

4 layer board of 0.71 x 0.51 inches (17.9 x 12.8 mm)
Uploaded: January 3rd 2022
Shared: January 3rd 2022
Total Price: $3.50

Test CLKIN functionality on ICM42688 performance.

Test CLKIN functionality on ICM42688 performance.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ST1PS03A.BuckConverter.v02

Top
Bottom

2 layer board of 1.60 x 0.61 inches (40.6 x 15.4 mm)
Uploaded: December 25th 2021
Shared: December 25th 2021
Total Price: $4.80

Breadboard-compatible 400 mA voltage source using USB or LiPo battery inputs. Output from 1.6 - 3.3 V via DIP switch and load switch for VOUT_AUX (==VIN). Slide switch for power enable.

Breadboard-compatible 400 mA voltage source using USB or LiPo battery inputs. Output from 1.6 - 3.3 V via DIP switch and load switch for VOUT_AUX (==VIN). Slide switch for power enable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8285_EnviroSense.v01

Top
Bottom

2 layer board of 1.07 x 1.07 inches (27.1 x 27.1 mm)
Uploaded: December 23rd 2021
Shared: December 23rd 2021
Total Price: $5.70

CR2450 3V coin-cell battery-powered ESP8285 host with HDC2010 humidity, APDS9253 RGBW light, and LPS22HB pressure sensors using ESPNOW. One-year battery life with deepSleep.

CR2450 3V coin-cell battery-powered ESP8285 host with HDC2010 humidity, APDS9253 RGBW light, and LPS22HB pressure sensors using ESPNOW. One-year battery life with deepSleep.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ST1PS03A.v01b

Top
Bottom

2 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded: December 12th 2021
Shared: December 13th 2021
Total Price: $2.10

Exposed auxiliary power switch I/O, power good output, and added power good led. Main and AUX enables are pulled down for default disabled state. Voltage select pulled down for 1V8 output by default. Move caps closer to ST1PS03 for better stability.

Exposed auxiliary power switch I/O, power good output, and added power good led. Main and AUX enables are pulled down for default disabled state. Voltage select pulled down for 1V8 output by default. Move caps closer to ST1PS03 for better stability.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC