CC-Dbg-TC2030-Adapter v1.0 Rev-B

By drmkroll

2 layer board of 1.19 x 1.00 inches (30.1 x 25.4 mm).
Shared on May 18th, 2014 14:56


CC-Dbg-TC2030-Adapter v1.0 Rev-B

By drmkroll

2 layer board of 1.19 x 1.00 inches (30.1 x 25.4 mm).
Shared on May 18th, 2014 14:56

This is the CC-Debugger TagConnect 2030 Adapter I created to flash my BLEbee’s firmware. I described the use of the adapter in the following blogpost: http://www.mkroll.mobi/?p=1639

The Eagle source files are available from the github repository at: https://github.com/michaelkroll/Hardware-Tools