Shared Projects by marshall

Shared Projects by marshall

ZebraPressureSwitch_V1a

2 layer board of 0.65 x 1.00 inches (16.5 x 25.4 mm)
Uploaded: December 18th 2018
Shared: December 18th 2018
Total Price: $3.25

Board to sit on the Nason Pressure Switch for FRC robots. .1" spaced holes allow for teams to mount headers/pins for jumpers. This is a BYOC affair so you can use locking ones if you prefer.

Board to sit on the Nason Pressure Switch for FRC robots. .1" spaced holes allow for teams to mount headers/pins for jumpers. This is a BYOC affair so you can use locking ones if you prefer.

Embeddable link to order this shared Project

ZebraPower775

2 layer board of 2.33 x 2.15 inches (59.2 x 54.5 mm)
Uploaded: December 13th 2018
Shared: December 13th 2018
Total Price: $24.95

Zebracorns 2018, Anderson Power Pole adapter for 775s and 550s.

Zebracorns 2018, Anderson Power Pole adapter for 775s and 550s.

Embeddable link to order this shared Project

IR LED Ring Light

2 layer board of 2.65 x 2.64 inches (67.2 x 67.1 mm)
Uploaded: May 17th 2016
Shared: September 14th 2018
Total Price: $34.90

IR LED Ring Light

IR LED Ring Light

Embeddable link to order this shared Project

CANTerm

2 layer board of 0.90 x 0.69 inches (22.9 x 17.5 mm)
Uploaded: May 12th 2018
Shared: May 21st 2018
Total Price: $3.05

CANBus Termination Board 1.0 - 1206 Packaged Resistors and Capacitor - 120 Ohm resistors and 4.7nF capacitor recommended. Hole is 3mm.

CANBus Termination Board 1.0 - 1206 Packaged Resistors and Capacitor - 120 Ohm resistors and 4.7nF capacitor recommended. Hole is 3mm.

Embeddable link to order this shared Project

10Pin_RJ45_Adapter

2 layer board of 1.49 x 0.79 inches (37.7 x 20.0 mm)
Uploaded: January 23rd 2016
Shared: January 17th 2018
Total Price: $5.80

10Pin Gadgeteer Connector to RJ45 Adapter (Pins 3 and 6 Omitted)

10Pin Gadgeteer Connector to RJ45 Adapter (Pins 3 and 6 Omitted)

Embeddable link to order this shared Project