Shared Projects by esden

Shared Projects by esden

20pin JTAG/SWD Adapter

Top
Bottom

2 layer board of 0.56 x 1.07 inches (14.2 x 27.2 mm)
Uploaded: December 13th 2017
Shared: December 13th 2017
Total Price: $2.95

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. Both connectors are thro…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. Both connectors are thro…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dronecode SWD Debug Adapter

Top
Bottom

2 layer board of 0.72 x 1.11 inches (18.2 x 28.2 mm)
Uploaded: December 13th 2017
Shared: December 13th 2017
Total Price: $3.95

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a standard Dronecode UAV autopilot.

This adapter board design is part of the [1BitSquared adapter collection](https://g…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a standard Dronecode UAV autopilot.

This adapter board design is part of the [1BitSquared adapter collection](https://g…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PMOD JTAG Adapter

Top
Bottom

2 layer board of 0.79 x 0.62 inches (20.1 x 15.6 mm)
Uploaded: December 13th 2017
Shared: December 13th 2017
Total Price: $2.40

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a PMOD interface popular on FPGA development boards. When using an IP core with JTAG/SWD interface this adapter makes it easy to connect an ARM Cortex …

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to a PMOD interface popular on FPGA development boards. When using an IP core with JTAG/SWD interface this adapter makes it easy to connect an ARM Cortex …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

20Pin JTAG/SWD half SMD Adapter

Top
Bottom

2 layer board of 0.68 x 1.07 inches (17.2 x 27.2 mm)
Uploaded: December 13th 2017
Shared: December 13th 2017
Total Price: $3.60

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. This is why the 20pin po…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the legacy ARM 20Pin JTAG connector. The adapter can accept male, female connector in streight and right angle configurations. This is why the 20pin po…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARM Crotex 10pin to 7pin breakout adapter

Top
Bottom

2 layer board of 0.79 x 0.52 inches (20.1 x 13.1 mm)
Uploaded: December 13th 2017
Shared: December 13th 2017
Total Price: $2.00

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to any arbitrary 100mil (0.1inch / 2.54mm) pitch connectors using flywires. The pinout of the 7pin connector is compatible with targets using the STMicroe…

Show full description

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to any arbitrary 100mil (0.1inch / 2.54mm) pitch connectors using flywires. The pinout of the 7pin connector is compatible with targets using the STMicroe…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC