Genesis M1 Breakout 0603 Edition
2 layer board of 0.45 x 0.28 inches (11.4 x 7.0 mm)
Uploaded:
January 7th 2021
Shared:
November 8th 2021
Total Price:
$0.60
This uses 3x 0603 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.
This uses 3x 0603 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.
Genesis M1 miniDIN Mount
2 layer board of 1.50 x 1.26 inches (38.1 x 32.0 mm)
Uploaded:
February 1st 2021
Shared:
November 8th 2021
Total Price:
$9.45
For use when installing a 9pin miniDIN in place of the RF modulator for RGB mods. Works great with the triple bypass mod. Order in 0.8mm for perfect fitment.
For use when installing a 9pin miniDIN in place of the RF modulator for RGB mods. Works great with the triple bypass mod. Order in 0.8mm for perfect fitment.
Genesis M1 Breakout 0402 Edition
2 layer board of 0.51 x 0.28 inches (12.9 x 7.0 mm)
Uploaded:
May 15th 2021
Shared:
November 8th 2021
Total Price:
$0.70
This uses 3x 0402 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.
This uses 3x 0402 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.
CDiRGB
2 layer board of 1.31 x 1.46 inches (33.3 x 37.1 mm)
Uploaded:
November 16th 2020
Shared:
November 16th 2020
Total Price:
$9.55
For updates to this project and to read the license details. See:
<https://github.com/mobiusstriptech/CD-i-RGB>
Shared under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International Public License
For updates to this project and to read the license details. See:
<https://github.com/mobiusstriptech/CD-i-RGB>
Shared under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International Public License
Zaxxon to JAMMA
2 layer board of 4.53 x 1.61 inches (115.1 x 40.9 mm)
Uploaded:
October 10th 2020
Shared:
October 10th 2020
Total Price:
$36.45
For updates to this project and to read the license details. See:
<https://github.com/mobiusstriptech/ZaxxonToJAMMA>
Shared under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International Public License
Parts Required
- 44 position 3.96mm pitch Edge Connector
- EDAC Pa…
Show full description
For updates to this project and to read the license details. See:
<https://github.com/mobiusstriptech/ZaxxonToJAMMA>
Shared under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International Public License
Parts Required
- 44 position 3.96mm pitch Edge Connector
- EDAC Pa…
Show full description
